Introduction to Network Types LAN, WAN and Other Area Networks

One way to categorize the different types of computer network designs is by their scope or scale. For historical reasons, the networking industry refers to nearly every type of design as some kind of area network. Common examples of area network types are:

• LAN - Local Area Network
• WLAN - Wireless Local Area Network
• WAN - Wide Area Network
• MAN - Metropolitan Area Network
• SAN - Storage Area Network, System Area Network, Server Area Network, or sometimes Small Area Network
• CAN - Campus Area Network, Controller Area Network, or sometimes Cluster Area Network
• PAN - Personal Area Network
• DAN - Desk Area Network

LAN - Local Area Network

A LAN connects network devices over a relatively short distance. A networked office building, school, or home usually contains a single LAN, though sometimes one building will contain a few small LANs (perhaps one per room), and occasionally a LAN will span a group of nearby buildings. In TCP/IP networking, a LAN is often but not always implemented as a single IP subnet.

In addition to operating in a limited space, LANs are also typically owned, controlled, and managed by a single person or organization. They also tend to use certain connectivity tec

hnologies, primarily Ethernet and Token Ring.

WAN - Wid

e Area Network

As the term imp

lies, a WAN spans a large physical distance. The Internet is the largest WAN, spa n nin g t h e Earth.

A WAN is a geographic

ally-dispersed collection of LANs. A network device called a

router connects

LANs to a WAN

. In IP networking, the router maintains both a LAN address and a WAN address.

A WAN differs from a LAN in several important ways. Most WANs (like the Internet) are not owned by a

ny one organization but rather exist under collective or distributed ownership and management. WANs tend to use technology like ATM, Frame Relay and X.25 for connectivity over the longer distances.

LAN, WAN and Home Networking

Residences typically employ one LAN and connect to the Internet WAN via an Internet Service Provider (ISP) using a broadband modem. The ISP provides a WAN IP address to the modem, and all of the computers on the home network use LAN (so-called private) IP addresses. All computers on the home LAN can communicate directly with each other but must go through a central gateway, typically a broadband router, to reach the ISP.

Other Types of Area Networks

While LAN and WAN are by far the most popular network types mentioned, you may also commonly see references to these others:

• Wireless Local Area Network - a LAN based on WiFi wireless network technology
• Metropolitan Area Network - a network spanning a physical area larger than a LAN but smaller than a WAN, such as a city. A MAN is typically owned an operated by a single entity such as a government body or large corporation.
• Campus Area Network - a network spanning multiple LANs but smaller than a MAN, such as on a university or local business campus.
• Storage Area Network - connects servers to data storage devices through a technology like Fibre Channel.
• System Area Network - links high-performance computers with high-speed connections in a cluster configuration. Also known as Cluster Area Network.

Set Up Router

1. Choose a convenient location to begin installing your router such as an open floor space or table. This does not need to be the permanent location of the device. Particularly for wireless routers, you may find it necessary to re-position the unit after installing it as the cables / signals may not reach all areas needed. At the beginning, its better to choose a location where it's easiest to work with the router and worry about final placement later.
2. Plug in the router's electrical power source, then turn on the router by pushing the power button.
3. (Optional) Connect your Internet modem to the router. Most network modems connect via an Ethernet cable but USB connections are becoming increasingly common. The cable plugs into the router jack named "WAN" or "uplink" or "Internet." After connecting the cable, be sure to power cycle (turn off and turn back on) the modem to ensure the router recognizes it.
4. Connect one computer to the router. Even if the router is a wireless model, connect this first computer to the router via a network cable. Using a cable during router installation ensures the maximum reliability of the equipment. Once a wireless router installation is complete, the computer can be changed over to a wireless connection if desired.
5. Open the router's administration tool. From the computer connected to the router, first open your Web browser. Then enter the router's address for network administration in the Web address field and hit return to reach the router's home page.Many routers are reached by either the Web address "http://192.168.1.1" or "http://192.168.0.1" Consult your router's documentation to determine the exact address for your model. Note that you do not need a working Internet connection for this step.
6. Log in to the router. The router's home page will ask you for a username and password. Both are provided in the router's documentation. You should change the router's password for security reasons, but do this after the installation is complete to avoid unnecessary complications during the basic setup.
7. If you want your router to connect to the Internet, you must enter Internet connection information into that section of the router's configuration (exact location varies). If using DSL Internet, you may need to enter the PPPoE username and password. Likewise, if you have been issued a static IP address by your provider (you would need to have requested it), the static IP fields (including network mask and gateway) given to you by the provider must also must be set in the router.
8. If you were using a primary computer or an older network router to connect to the Internet, your provider may require you to update the MAC address of the router with the MAC address of the device you were using previously. Read How to Change a MAC Address for a detailed description of this process.
9. If this is a wireless router, change the network name (often called SSID). While the router comes to you with a network name set at the factory, you will never want to use this name on your network. Read How to Change the Router SSID for detailed instructions.
10. Verify the network connection is working between your one computer and the router. To do this, you must confirmed that the computer has received IP address information from the router. See How to Find IP Addresses for a description of this process.
11. (If applicable) Verify your one computer can connect to the Internet properly. Open your Web browser and visit a few Internet sites such as http://compnetworking.about.com/.
12. Connect additional computers to the router as needed. If connecting wirelessly, ensure the network name (SSID) of each is computer matches that of the router.
13. Finally, configure additional network security features as desired to guard your systems against Internet attackers. These WiFi Home Network Security Tips offer a good checklist to follow.

Networking

Network Design

Computer networks also differ in their design. The two types of high-level network design are called client-server and peer-to-peer. Client-server networks feature centralized server computers that store email, Web pages, files and or applications. On a peer-to-peer network, conversely, all computers tend to support the same functions. Client-server networks are much more common in business and peer-to-peer networks much more common in homes.

A network topology represents its layout or structure from the point of view of data flow. In so-called bus networks, for example, all of the computers share and communicate across one common conduit, whereas in a star network, all data flows through one centralized device. Common types of network topologies include bus, star, ring and mesh.

Network Protocols

In networking, the communication language used by computer devices is called the protocol. Yet another way to classify computer networks is by the set of protocols they support. Networks often implement multiple protocols to support specific applications. Popular protocols include TCP/IP, the most common protocol found on the Internet and in home networks.

Wired vs Wireless Networking

Many of the same network protocols, like TCP/IP, work in both wired and wireless networks. Networks with Ethernet cables predominated in businesses, schools, and homes for several decades. Recently, however, wireless networking alternatives have emerged as the premier technology for building new computer networks.